SPEAKING WITH NEWBIES ABOUT STOPPING MOTORCYCLES
I was at one of the local motorcycle dealers this week. As I was walking around the large showroom, I happened to pass by a sales person while he was pointing out the motorcycle controls to a potential customer, “…and this is the front brake lever…”
But before he could say anymore, the potential customer jumped in, “Oh, but you shouldn’t use that, right? Wouldn’t you flip over?”
I didn’t catch everything the salesperson said, as I was shortly out of hearing range, but I did catch just enough to understand that he was trying to politely advise the newbie that the front brake was an important part of a bike’s stopping system.
Who knows where the newbie got his idea, but over the years I’ve listened to a number of other inexperienced riders remark about how they are timid about the use of their front brake lever.
FRONT BRAKES DESERVE SOME RESPECT – BUT THEY “MUST” BE CONFIDENTLY USED TO MAXIMIZE BRAKING FORCE
The front brake does deserve some respect, since it accounts for the majority of braking force. However, I am still amazed that riders will risk their lives out on public roads without having full confidence in how to use ALL of the bike’s braking potential.
That potential customer on the showroom floor was wise to have blurted out his understanding (or lack thereof) of the front brake, so that he could have that bad idea corrected before he even owned a bike. Imagine if he didn’t mention it? What if that guy bought the bike in question and rode for quite a while harboring the notion that a front brake is a taboo control?
At some point that bad idea would get him hurt.
(Here in California, it’s illegal to ride a motorbike without a motorcycle license, but it is not illegal for a dealer to sell a motorcycle to an untrained and unlicensed rider. This results in various brand-new motorcycle accidents with first-time riders, right on dealer parking lots. And I’ve been there when it has happened! But that’s a different story altogether….)
Anyway, if you know of a new rider, or any rider who is not a trained motorcyclist, you would be doing them a favor to find out what their understanding is regarding the use of their front brake. If they have any notion that they should use it as little as possible, you ought to invite their appreciation to the reality that front brakes account for about 70% of their bike’s braking power, and that they should use their front brake ALL the time, in conjunction with their rear brake, so that they are fully familiar with using both, and can bring their bike to a very quick stop any time the circumstances demand.
Riding is where all the fun is. Efficient stopping is an important part of where survival is.
How much do YOU use your front brake? (Post your comment below.)
I often wonder how much the fact that US bicycles have their front brake on the left contributes to this problem. I can’t imagine trying to teach my subconscious to use the right hand for front brake on a motorcycle and the left when the power comes from my legs. Consequently, my bicycle brakes are reversed before I even leave the store, what is sometimes called ‘motocross’ style.
I’ve used front and rear from day 1 and it’s kept my fanny off the asphalt thus far (and there’ve been some hairy moments!). It’s like anything else you learn. If you learn it wrong it’s harder to correct when it becomes imperative to do so. I be dead, maimed or, at the very least, bikeless had I not learned to brake properly from the beginning.
MSF says and I agree, brake with both hand and foot… all the time, because the day will come when you really need all the stopping power of the bike and your second nature reaction WILL be with both brakes. If you are using only one all the time then thats all you got. Better to have 100% stopping power than 30 or 70% only.
When I work with new riders, somewhat contrary to conventional (sound) wisdom, I advise riders to ONLY use the front brake. Why? A new riders dexterity is much greater in their hands and fingers than their feet. Riders have MUCH greater feel in their fingers than the sole of their boot.
Many riders who low side (and the occasional high side) are caused by this lack of feel on the rear brake. The rider appropriately uses both brakes, but then fails to modulate or release the rear brake. And that’s when trouble starts. I consider rear braking to be a near advanced technique because of that.
FWIW
I had to try stoping my bike with just the rear brakes. at 100kph (60mph) it took me well over 150m to pull up my 900 sports bike (fitted with the best brake system avalible for my model). in any sort of emergency or even an unexpected corner im really hurting if not dead. But its not just the fact that this customer did not realise the nessesity for a front brake, even minimal riding experience teaches us the importance of posture under braking, preloading the front suspention, syncronised engine braking or even how the road surface dictates the weight/power applied. without all of these skills you cannot hope to be called a novice rider, your simply someone who opens the gas and hangs on.
Here in Australia were put through a wekend course to get a learners permit to ride on road and then we are restricted to 250cc and under for the first 2 years. Any less is simply negligence on behalf of the riding community and thier state government.
It’s this kind of nonsense, and total lack of understanding that keeps getting people killed, and as a result, gives motorcyclists and our sport a bad name!! I wish we’d adopt a “start-at-the-bottom-and-work-your-way-up” approach with motos here in the U.S. Kids, or newbie adults for that matter, shouldn’t be blasting around on big displacement crotch-rockets, or 1200 cc two-wheeled tanks until they’ve learned a little about the basics of a bike..like how to use the brakes!!! Start with a 250 or smaller and ride, ride, ride….then think about moving up. Your confidence and abilities will grow sequentially.
Maybe the front brake comes from kid area of bicycles and hand brakes………..
@ 70% of the braking is done by the front brakes on all motorcycles…..
I use a system made by [promotional ad removed by editor] ……………….I can really put lots of ppressure on , front or rear , and not lock up ( OR FLIP OVER THE HANDLE BARS ======= L O L )
It is very hard to mke a stop using the back only…………
George 772 370 6630
Florida